close [x]
close [x]
Price Request

*Add your products to request pricing

Yamaha 26 x 8 Matrix Mixer / Signal Processor

PART #: YM-MTX3

The MTX3 features:

  • •8ch mic/line input and 8ch analog output
  • •16ch YDIF digital I/O
  • •SD Card Slot for playback

Call 1800 00 77 80

Talk to an expert about this product

26 x 8 Matrix Mixer / Signal Processor Rollover to zoom [+]
Designed primarily for multi-zone commercial installations, MTX Series matrix processors are equipped with flexible processing functions that are essential to a wide variety of applications such as retail stores, restaurant/bars or banquet rooms. Responsible for the primary processing functions at the heart of your system's design, MTX processors allow you to configure, program, and manage your entire sound solution via the intuitive interface of the accompanying MTX Editor software application. The series is comprised of two models with varying DSP capacities and expansion capabilities, allowing MTX processors to meet the demands of a truly impressive range of commercial environments.
Model MTX3 MTX5-D
Memory bank PRESET: 50
Mixing Capacity Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix Mixing Channel : 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix
Output Busses : 8 Mono Output Busses : 16 Mono
Input Channel Functions Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4) Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8)
Stereo CH: 3-band PEQ, Comp, Auto Gain Control Stereo CH: 3-band PEQ, Comp, Auto Gain Control
Output Channel Functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter
Internal Processing Priority Ducking, Ambient Noise Compensator
Sampling frequency rate 48kHz/ 44.1kHz 48kHz/ 44.1kHz
Signal delay Less than 2.5ms (AD-DA @48kHz) Less than 3.0ms (AD-DA @48kHz)
Total harmonic distortion*1 Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)
Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB
Dynamic range 107dB (Gain:-6dB)
Hum & noise level
(20Hz to 20kHz), Rs=150Ω
-60dBu (Gain:+66dB), -83dBu (Gain:-6dB)
Phantom Power +48V
Crosstalk (@1kHz) -100dB
Heat diffusion 43kcal/h max 55.9kcal/h max
Power requirements AC100V-240V 50Hz/60Hz
Power consumption 50W 65W
Dimensions W 480mm (18.9"") 480mm (18.9"")
H 44mm (1.7"") 88mm (3.4"")
D 362mm (14.3"") 351mm (13.9"")
Weight 4.8kg (10.6lbs) 6.3kg (13.9lbs)

*1 Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz; equivalent to 20kHz fi lter with infi nite dB/Oct attenuation

Analog Input Specifications

Input terminal GAIN Actual load
impedance
For use with
nominal
Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics
& 600ΩLines
-62dBu -42dBu Euroblock
-6dB +10dBu +30dBu
ST IN 1,2 - 10kΩ 600Ω Lines -10dBV +10dBV RCA Pin Jack

Analog Output Specifications

Output terminal Actual Source
impedance
For use with
nominal
Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩLines +4dBu +24dBu Euroblock

Digital Input and Output Specifications

Terminal Format Level IN/OUT Connector Note
YDIF In YDIF RS-422 16IN RJ45  
YDIF Out YDIF RS-422 16OUT RJ45  
Primary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only
Secondary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only

Control I/O Specifications

Terminal Level Connector
MTX3 GPI 8IN / 4OUT IN 1-7ch: 0V-5V
8ch: 2.5-24V : High, 2.5V or less, Allowable input +24V
Euroblock
OUT Open Collector
+V DC5V
Network   100Base-TX RJ-45
MTX5-D GPI 16 IN/ 8 OUT IN 1-15ch : 0-5V
16ch : 2.5-24V : High, 2.5V or less, Allowable input +24V
Euroblock
OUT Open Collector
+V DC5V
MTX3 & MTX5-D REMOTE   RS-232C (BAUD RATE
: 38.4kbps or
115.2kbps)
D-sub 9pin (Male)
DCP   - RJ-45