Products

---

WESTERMO DDW-222 INDUSTRIAL ETHERNET EXTENDER

Introduction

The Westermo DDW-222 can be used to extend Ethernet networks over existing copper cables in point-to-point, daisy-chain or redundant ring applications.

Also included in the DDW-222 are a RS-232 serial adapter and a 10-port Virtual Com port re-director software. The unit supports TCP client, TCP server and UDP protocol modes allowing it to be used in a wide variety of applications. Point-to-point transmission distances of up to 10 km can be achieved with data-rates of 5.7 Mbit/s possible over shorter distances on a single copper pair.

The redundant protocol can be used ether on the SHDSL interface or on the built-in Ethernet switch. Our unique FRNT (Fast Recovery of Network Topology) technology is the fastest protocol on the market to re-configure a network in the event of any failure of a link or hardware. The built-in 4 port Ethernet switch makes the Westermo DDW-220 the only necessary component required to create a small network. Total galvanic isolation between all interfaces, extended type approvals and rugged mechanical design as well as extensive over-voltage protection and line interface voltage suppression makes the DDW-220 the best solution in harsh industrial environments.

Application

The Westermo DDW-222 can be used to extend Ethernet networks over existing copper cables in point-to-point, daisy-chain or redundant ring applications.

Features

• RS-232 serial adapter
• 10 port Virtual Com software
• Redundant protocol (FRNT) on SHDSL or on the Ethernet switch
• Plug and play
• Data rates up to 5,7 Mbit/s
• Distance up to 10 km
• Extensive line protection
• 2 x SHDSL
• SNMP and comprehensive diagnostic
• 16 – 60 VDC power supply
• Reverse polarity protection
• 4 ports Ethernet switch
• Web interface
• Made for extreme environments
• – 40°C to +70°C
• Metal housing
• IP 40
• DIN mounting

Downloads