IntroductionNPort 5200 device servers can operate in TCP Server, TCP Client, or UDP operation mode, ensuring compatibility with software based on a standard network API (Winsock, BSD Sockets).
With the Real COM/TTY drivers that are provided with each NPort, software designed for communication with COM/TTY ports can be instantly and seamlessly integrated into a TCP/IP network. This is an excellent way to preserve your software investment and enjoy the benefits of networking your serial devices, with no fuss.
ApplicationControl Remote Serial Devices Using TCP/IP or Traditional COM/TTY Port. By specifying the NPort 5200’s IP address and port number, a network sockets API can obtain access to the attached serial device over the network, from any host computer that supports TCP/IP. For legacy Windows or Linux software that is COM or TTY-based, MOXA’s COM/TTY drivers provide a seamless way to operate over the Internet.
Features
- Makes serial devices internet ready
- Versatile socket operation modes, including TCP Server, TCP client, UDP
- Easy mass installation with Windows utility
- Small size
- 10/100 Mbps Ethernet
- 2 or 4 wire RS-485 with patented Automatic Data Direction Control
- (ADDC TM)
- Built-in 15 KV ESD protection for all serial signals
- Suports SNMP MIB-11 for network management
Ordering InformationM NPort 5210 - 2-port RS-232 serial device server
M NPort 5210-T - NPort 5210, -40 to 75°C operating temperature
M NPort 5230 - 2-port serial device server with 1 RS-232 port, 1 RS-422/485 port
M NPort 5230-T - NPort 5230, -40 to 75°C operating temperature
M NPort 5232 - 2-port RS-422/485 serial device server
M NPort 5232-T - NPort 5232, -40 to 75°C operating temperature
M NPort 5232I - 2-port RS-422/485 serial device server with 2 KV isolation
M NPort 5232I-T - 2-port RS-422/485 serial device server with 2 KV isolation, -40 to 75°C operating temperature
Downloads Data Sheet - Moxa NPort 5200 Serial Device Server
|
|
