IntroductionMoxa's new CP-602E-I CAN (Controller Area Network) interface board supports the PCI Express interface. As a stand-alone CAN controller, the CP-602E-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602E-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602E-I-T only) and 2 KV isolation make the boards suitable for use in harsh industrial environments.
Features
- CAN 2.0A and CAN 2.0B supported
- Two independent CAN communication ports
- CAN transfer rate up to 1 Mbps
- 2 KV optical isolation protection
- LED for transmit/receive status on each port
- Optional 120 ohm terminal resistor for CAN bus network
- DLL library and examples included
- Windows driver provided
Ordering InformationCP-602E-I - 2-port CAN interface PCI Express board, with 2 KV optical isolation protection, 0 to 55°C operating temperature
CP-602E-I-T - 2-port CAN interface PCI Express board with 2 KV optical isolation protection, -40 to 85°C operating temperature
Downloads Data Sheet - Moxa, CP-602E-I Series
Users Manual - Moxa, CAN Interface Board
Installation Guide - Moxa, CAN Interface Board
|
|
