PCI Boards
MOXA CAN INTERFACE BOARD CP-602U-I SERIES

CAN Interface Board CP-602U-I Series - 2-port CAN Interface Universal PCI board with 2 KV isolation

Introduction

Moxa's new CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602U-I-T only) and 2 KV isolation make the boards suitable for use in harsh industrial environments.

Features

CAN 2.0A and CAN 2.0B supported

Two independent CAN communication ports

CAN transfer rate up to 1 Mbps

2 KV optical isolation protection

LED for transmit/receive status on each port

Optional 120 ohm terminal resistor for CAN bus network

DLL library and examples included

Windows driver provided

Ordering Information

CP-602U-I - -port CAN interface Universal PCI board, with 2 KV isolation protection, 0 to 55°C operating temperature
CP-602U-I-T - 2-port CAN interface Universal PCI board with 2 KV optical isolation protection, -40 to 85°C operating temperature