Introduction
The CRM100-RF is a boundary layer, through-table, omni-directional condenser microphone, with a built-in mechanism that will allow the user to make the microphone disappear without having to physically remove it from the table. This is achieved by simply pressing the top of the microphone downwards until it locks; then by pressing the microphone again it will raise itself back to its original position above the surface of the table. Engineered in high quality brass with built-in shock mount and RF filter.
ApplicationBoardrooms / meeting rooms
Features
Easy to install
Low profile at surface level
Unique ability to lock capsule away from sight when not in use
Robust brass construction
Omni-directional polar pattern
Built-in RF filter
Balanced output
Supplied with 2m (6.6 ft) 2 core + screen cable
Satin Nickel or Black Nextel finish
Specifications
Type Condenser: (Back Electret)
Polar Pattern: Omni-directional
Frequency Response: 30Hz ~ 20KHz
Sensitivity: -42.5dB +/- 3dB @ 1KHz (0dB = 1v/Pa)
Impedance: 200ohms
S/N Ratio: 68dB(A)
Maximum SPL: 120dB at 1KHz 1% T.H.D.
Power Requirements: 9 ~ 48v Phantom Power
Termination: Open ended
Dimensions
Above Table: 15.00mm (0.59)
Diameter: 36.00mm (1.42)
Below Table: 111.00mm (4.37)
Diameter: 30.00mm (1.18)
Ordering InformationCRM100-RF - CRM 100-RF Retractable through-table omni-directional condenser microphone
Downloads Data Sheet - Clockaudio, CRM 100-RF
Installation Guide - Clockaudio, CRM 100-RF
Line Drawing - Clockaudio, CRM 100-RF
|
|
