Introduction
The CRM102-RF is a boundary layer, through-table, cardioid condenser microphone, with a built-in mechanism that will allow the user to make the microphone ‘disappear’ without having to physically remove it from the table. This is achieved by simply pressing the top of the microphone downwards until it locks; then by pressing the microphone again it will raise itself back to its original position above the surface of the table. Engineered in high quality brass with built-in shock mount and RF filter.
Specifications
Type: Condenser (Back Electret)
Polar Pattern: Half Cardioid
Frequency Response: 50Hz - 18KHz
Sensitivity: -47dB +/-3dB @ 1KHz (0dB = 1v/Pa)
Impedance: 200ohms
S/N Ratio: 64dB(A)
Maximum SPL: 125db at 1KHz 1% T.H.D.
Power Requirements: 9 ~ 48v Phantom Power
Termination: Open ended
Dimensions
Above Table: 15.00mm (0.59”) Diameter: 36.00mm (1.42”)
Below Table: 111.00mm (4.37”) Diameter: 30.00mm (1.18”)
ApplicationBoardrooms / meeting rooms
Ordering InformationCRM 102-RF - Retractable through-table half-cardioid condenser microphone
Downloads Data Sheet - Clockaudio, CRM102-RF
Installation Guide - Clockaudio, CRM102-RF
Line Drawing - Clockaudio, CRm102-RF
|
|
