Introduction
A simple, effective line level speaker switcher that allows the user to select up to four pairs of speakers from a single balanced stereo line level source. All ins and outs are balanced.
The line level selector unit suitable for the connection of four (4) balanced stereo pairs of powered monitor speakers to the outputs of a balanced stereo line level source. The selector unit has two (2) female XLR connectors for connection to the line source and eight (8) male XLR connectors for connection to the powered monitors. All three (3) pin XLR connectors will be located on the rear panel and shall be wired with pin 2 “hot” or in phase with respect to the input, and pin 3 “cold” or anti-phase. The pin 1 “ground” of the male XLR connectors (outputs) are bussed together with all of the associated pin 1 “grounds” of the female XLR connectors (inputs) in its circuit, either left or right. The switching is accomplished using four (4) 4PDT miniature toggle switches, located on the front panel of the unit, allowing any individual output or combination of the outputs to be fed from the stereo input.
Ordering InformationSwitch Witch - Switch Witch Powered Monitor Selector
|
|
